140UD601B integrated circuit is a high-quality multi-purpose operational amplifier featuring internal frequency compensation.
Features:
· Low input current
· Low offset current
· Internal frequency compensation
· High voltage gain factor
· Short-circuit protection
MaximumPermissibleOperatingConditions
| Parameter, unit of measure | Symbol | Standard | Limiting condition exposure time | |||
| Maximum permissibleconditions | Limiting conditions | |||||
| at least | less than | at least | less than | |||
| Supply voltage, V | VCC | ±13.5? | ±16.5 | ±5 | ±20 | 1 min with a pulse rate of 30 min |
| Input common-mode voltage, V (at VCC?±15 V, ±VIC?± VCCmin) | VIC | ±10 | ±15 | |||
| Load resistance, kOhm | RL | 2.0 | 1.0 | |||
Note: ? - the integrated circuits are allowed to be used during the entire service life if the supply voltage is from ±5 to ±13.5 V. If the supply voltage is lower than ±13.5 V, the parameter standards are not applicable.
Guaranteed service life (if used as specified) - 100,000 hours
Guaranteed service life (at reduced capacity) - 120,000 hours
y-percentile time to failure when y =97.5%, if used as specified - 200,000 hours
Basic Electrical Parameters at t= 00C +700C
| Parameter, unit of measure | Symbol | Standard | Test conditions, VCC, V | |
| at least | less than | |||
| Maximum output voltage, V | VOMAX | 12.0 10.5 | -12.0 -10.5 | ±15.0 ±13.5 |
| Offset voltage, mV | VIO | -8.0 -9.0 | 8.0 9.0 | ±15.0 ±16.5 |
| Input current, nA | II | -50 -55 | 50 55 | ±15.0 ±16.5 |
| Offset current, nA | IIO | -15.0 -18.0 | 15.0 18.0 | ±15.0 ±16.5 |
| Current consumption, mA | ICC | 2.8 3.0 | ±15.0 ±16.5 | |
| Voltage gain factor | AV | 50,000 | ±15.0 | |
| 45,000 | ±13.5 | |||
| Maximum input common-mode voltage, V | VICMAX | 11 | -11 | ±15.0 |
| Common mode rejection ratio, dB | KCMR | 70 | ±15.0 | |
| Input resistance, MOhm | RI | 1.0 | ±15.0 | |
| Supply voltage rejection ratio, µV/V | KSVR | 200 | ±15.0 | |
| Unity gain frequency, MHz | f1 | 1.0 | ±15.0 | |
| Maximum slew rate, V/ µs | SR | 2.0 | ±15.0 | |
| Offset voltage temperature ratio, µV/°С | αUIO | -135 -135 | 135 135 | ±15.0 |
| Offset current temperature ratio, nA/°С | αIIO | -0.5 | 0.5 | ±15.0 |
