DPM-20-N1-08T - Electromechanical devices | Russian Electronics company

* Pictures are placed for illustration purpose only. Appearance of real component may differ.

DPM electrical motors contain an alnico permanent magnet. Version N3 has a built-in centrifugal speed stabilizer, N1 and N2 do not.

DPR electrical motors contain an internal and external concentrical permanent magnet stators with bucket-shaped rotor placed in air gap between of them. Bottom of rotor is attached to a shaft. Motors have a fast response, provided by rotor`s low moment of inertia.

Technical parameters

Version	Rated parameters				Idle current, A	Starting parameters		Lifetime, h
Version	Voltage, V	Torque, mN?m	RPM	Current, A	Idle current, A	Torque, mN?m	Current, A	Lifetime, h
DPM-20-N1/N2-01	29	0.5	9000	0.075	0.05	6	0.7	300
DPM-20-N1/N2-02	27	1	4000	0.07	0.05	2	0.25	700
DPM-20-N1/N2-04	6	0.2	2000	0.06	0.05	0.6	0.33	1000
DPM-20-N1/N2-05	14	0.2	2000	0.05	0.04	1	0.14	1000
DPM-20-N1/N2-06	27	1.5	9000	0.15	0.06	6	1	300
DPM-20-N1/N2-07	27	2.0	6000	0.15	0.05	5	0.65	500
DPM-20-N1/N2-08	27	2	4500	0.15	0.06	4	0.4	600
DPM-20-N1/N2-11	12	1.5	9000	0.35	0.13	6	2.3	300
DPM-20-N1/N2-12	12	2	6000	0.3	0.12	5	1.7	500
DPM-20-N1/N2-12A	14	1.8	600	0.25	0.11	б	1.1	500
DPM-20-N1/N2-13	12	1.5	4500	0.25	0.11	4	0.9	600
DPM-20-N1/N2-14	12	1	2500	0.1	0.05	2	0.35	1000
DPM-20-N1/N2-16	6	1	9000	0.55	0.3	6	4.3	300
DPM-20-N1/N2-17	6	1.5	6000	0.5	0.25	6	2.6	500
DPM-25-N1/N2-01	29	3.5	9000	0.25	0.08	15	2.6	300
DPM-25-N1/N2-02	27	3.0	3800	0.1	0.04	10	0.7	900
DPM-25-N1/N2-02A	27	1	4500	0.06	0.04	10	0.7	800
DPM-25-N1/N2-03	12	4.5	6000	0.6	0.2	10	3.8	400
DPM-25-N1/N2-04	27	5	2500	0.15	0.04	8	0.5	1000
DPM-25-N1/N2-05	15	5	2500	0.22	0.07	8	0.9	1000
DPM-25-N1/N2-06	27	5	6000	0.3	0.09	15	1.9	500
DPM-25-N1/N2-07	27	5	4500	0.22	0.06	12	1.1	800
DPM-25-N1/N2-09	12	3.5	9000	0.65	0.23	15	6.2	200
DPM-25-N1/N2-10	12	5	4500	0.52	0.16	12	2.5	800
DPM-25-N1/N2-10A	14	5	4500	0.45	0.13	12	2	800
DPM-25-N1/N2-11	12	5	2500	0.28	0.09	8	1.2	1000
DPM-30-N1/N2-01/02	29	7	9000	0.5	0.18	35	5.9	200
DPM-30-N1/N2-02/01	27	10	2600	0.25	0.06	20	1.1	1000
DPM-30-N1/N2-03	27	10	4500	0.5	0.13	30	2.5	600
DPM-30-N1/N2-04	26	10	5500	0.5	0.2	25	3.2	500
DPM-30-N1/N2-05	27	7	600	0.4	0.15	25	3.4	500
DPM-30-N1/N2-08	12	7	9000	1.2	0.4	35	14.2	100
DPM-30-N1/N2-09	12	10	6000	1.2	0.35	35	8.3	300
DPM-30-N1/N2-10	12	10	4500	1	0.32	25	5.2	600
DPM-30-N1/N2-10A	14	10	4500	0.8	0.2	28	5.2	600
DPM-30-N1/N2-11	12	10	2500	0.6	0.17	20	2.4	1000
DPM-35-N1/N2-01	27	15	9000	1.3	0.3	70	12	100
DPM-35-N1/N2-02	27	15	3500	0.45	0.09	50	2.8	800
DPM-35-N1/N2-03	6	23	1800	2	0.45	35	7.4	1000
DPM-35-N1/N2-04	27	20	6000	1.1	0.26	60	6.8	200
DPM-35-N1/N2-05	27	20	4500	0.85	0.21	50	4.8	600
DPM-35-N1/N2-06	27	20	2500	0.53	0.12	35	2.2	800
DPM-35-N1/N2-08	12	15	9000	2.8	0.75	70	2.2	50
DPM-35-N1/N2-09	12	20	6000	2.2	0.55	60	14	100
DPM-35-N1/N2-10	12	20	4500	1.6	0.42	50	10.5	500
DPM-35-N1/N2-11	12	20	2500	1.15	0.27	35	5.2	1000

For DPM motors: first two digits – case diameter in mm. Last two digits – version number. N1 – one shaft tail, N2 – two shaft tails, N3 – built-in stabilizer

Case length for N3 version: DPM-20 – 50 mm, DPM-25 – 59 mm, DPM-30 – 72 mm. Version N1/N2: DPM-20 – 38 mm, DPM-25 – 45.5 mm, DPM-30 – 57 mm, DPM-35 – 64.5 mm

For DPR motors: first digit – dimension code, second – number of poles, N1 – one shaft tail, N2 – two shaft tails, last digits – version.

DPR motors can be supplied in regular mounting version (N in annotation) and flange mounting version (F in annotation, except dimension code 2)

DPR motors can be used as a speed-voltage generators.

Version	Rated parameters				Starting torque, mN?m
Version	Voltage, V	Torque, mN?m	Rpm	Current, A	Starting torque, mN?m
DPM-20-N3-01	27	1	9000	0.2	7
DPM-20-N3-02	27	1	12000	0.25	8
DPM-20-N3-03	27	1.5	6000	0.18	6
DPM-20-N3-04	27	2	4500	0.15	5
DPM-20-N3-06	12	1	9000	0.45	7
DPM-20-N3-07	12	1	12000	0.55	8
DPM-20-N3-08	12	1.5	6000	0.45	6
DPM-20-N3-09	12	2	4500	0.4	5
DPM-20-N3-06A	14	1	9000	0.4	7
DPM-20-N3-07A	14	1	12000	0.5	8
DPM-20-N3-08A	14	1.5	6000	0.4	6
DPM-20-N3-09A	14	2	4500	0.35	5
DPM-25-N3-01	27	3	6000	0.25	18
DPM-25-N3-02	27	2.2	9000	0.3	20
DPM-25-N3-03	12	3	6000	0.6	18
DPM-25-N3-04	27	2	12000	0.3	20
DPM-25-N3-05	24	4	4500	0.25	15
DPM-25-N3-06	12	2.2	9000	0.65	20
DPM-20-N3-01	27	1	9000	0.2	7
DPM-20-N3-02	27	1	12000	0.25	8
DPM-20-N3-0З	27	1 .5	6000	0.18	6
DPM-20-N3-04	27	2	4500	0.15	5
DPM-20-N3-06	12	1	9000	0.45	7
DPM-20-N3-07	12	1	12000	0.55	8
DPM-20-N3-08	12	1 .5	6000	0.45	6
DPM-20-N3-09	12	2	4500	0.4	5
DPM-20-N3-06A	14	1	9000	0.4	7
DPM-20-N3-07A	14	1	12000	0.5	8
DPM-20-N3-08A	14	1 .5	6000	0.4	6
DPM-20-N3-09A	14	2	4500	0.35	5
DPM-25-N3-01	27	3	6000	0.25	18
DPM-25-N3-02	27	2.2	9000	О.3	20
DPM-25-N3-03	12	3	6000	0.6	18
DPM-25-N3-04	27	2	12000	О.3	20
DPM-25-N3-05	24	4	4500	0.25	15
DPM-25-N3-06	12	2.2	9000	0.65	20
DPM-25-N3-07	12	2	12000	0.65	20
DPM-25-N3-08	12	4	4500	0.55	15
DPM-25-N3-03A	14	3	6000	0.5	18
DPM-25-N3-06A	14	2.2	9000	0.6	20
DPM-25-N3-07A	14	2	12000	0.6	20
DPM-25-N3-08A	14	4	4500	0.5	15
DPM-25-N3-16	27	5.6	5200	0.5	18
DPM-30-N3-01	27	7	9000	0.85	40
DPM-30-N3-02	27	5	12000	0.7	35
DPM-30-N3-03	27	1 1	6000	0.7	35
DPM-30-N3-04	27	10	4500	0.6	30
DPM-30-N3-06	12	7	9000	1.8	40
DPM-30-N3-07	12	5	12000	1.9	40
DPM-30-N3-08	12	10	6000	1.5	35
DPM-30-N3-09	12	10	4500	1.3	З0
DPM-30-N3-06A	14	17	9000	1 .7	40
DPM-30-N3-07A	14	5	12000	1.8	40
DPM-30-N3-08A	14	10	6000	1 .4	35
DPM-30-N3-09A	14	10	4500	1 .2	30

Version	Rated parameters				Idle current, A	Starting parameters		Lifetime, h
Version	Voltage, V	Torque, mN?m	Rpm	Current, A	Idle current, A	Torque, mN?m	Current, A	Lifetime, h
DPR-2-N1/N2-01	12	1	9000	0.145	0.035	4	0.9	500
DPR-2-N1/N2-02	12	1.2	6000	0.13	0.03	3	0.59	1000
DPR-2-N1/N2-05	6	1	9000	0.29	0.085	4	1.85	500
DPR-2-N1/N2-06	6	1	6000	0.23	0.063	2.6	1	1000
DPR-2-N1/N2-07	6	1	4500	0.175	0.04	2.6	0.75	2000
DPR-2-N1/N2-08	6	1	2500	0.13	0.025	2	0.46	3000
DPR-2-N1/N2-13	6	0.2	6000	0.066	0.04	1.6	0.75	2000
DPR-32-N1/N2-01	27	2	9000	0.14	0.05	13	1.13	500
DPR-32-N1/N2-02	27	2.5	6000	0.12	0.035	10	0.66	1000
DPR-32-N1/N2-03	27	2.5	4500	0.095	0.025	7.5	0.41	2000
DPR-32-N1/N2-05	12	2	9000	0.3	0.1	15	2.8	600
DPR-32-N1/N2-06	12	2	6000	0.2	0.06	11	1.46	1000
DPR-32-N1/N2-07	12	2	4500	0.16	0.045	6.6	0.84	200
DPR-32-N1/N2-08	12	2	2500	0.115	0.03	4.6	0.38	3000
DPR-42-N1/N2-01	27	5	9000	0.2	0.08	36	3	500
DPR-42-N1/N2-02	27	5	6000	0.2	0.048	22	1.35	1000
DPR-42-N1/N2-03	27	5	4500	0.16	0.035	17	0.9	2000
DPR-42-N1/N2-04	27	5	2500	0.11	0.023	10.7	0.39	3000
DPR-42-N1/N2-05	12	5	9000	0.66	0.185	30	5.8	400
DPR-42-N1/N2-06	12	5	6000	0.45	0.106	24	3.3	800
DPR-42-N1/N2-07	12	5	4500	0.35	0.08	19	2.1	1500
DPR-42-N1/N2-08	12	5	2500	0.24	0.05	11.7	0.92	2500
DPR-52-N1/N2-01	27	10	9000	0.53	0.1	12	10	500
DPR-52-N1/N2-02	27	10	6000	0.36	0.07	87	5.25	1000
DPR-52-N1/N2-03	27	10	4500	0.26	0.045	75	3.25	2000
DPR-52-N1/N2-04	27	10	2500	0.16	0.025	42	1.15	3000
DPR-52-N1/N2-05	12	10	9000	1.2	0.25	108	19.6	400
DPR-52-N1/N2-06	12	10	6000	0.8	0.16	81	11.7	800
DPR-52-N1/N2-07	12	10	4500	0.6	0.145	68	6.6	1500
DPR-52-N1/N2-08	12	10	2500	0.35	0.055	51	2.9	2500
DPR-62-N1/N2-01	27	20	9000	1	0.18	200	13	300
DPR-62-N1/N2-02	27	20	6000	0.72	0.12	170	9.6	600
DPR-62-N1/N2-03	27	20	4500	0.55	0.086	147	6.2	1500
DPR-62-N1/N2-04	27	20	2500	0.33	0.05	82	2.15	2500
DPR-62-N1/N2-05	12	20	9000	2.4	0.4	190	27	500
DPR-62-N1/N2-06	12	20	6000	1.5	0.27	177	18.4	500
DPR-62-N1/N2-07	12	20	4500	1.2	0.19	125	11.9	1000
DPR-62-N1/N2-08	12	20	2500	0.73	0.11	81	4.7	2000
DPR-72-N1/N2-02	27	40	6000	1.35	0.17	350	16.5	500
DPR-72-N1/N2-03	27	40	4500	1	0.12	300	13.3	1000
DPR-72-N1/N2-04	27	40	2500	0.6	0.09	190	4.7	2000
DPR-72-N1/N2-06	12	40	6000	3	0.38	320	24	500
DPR-72-N1/N2-07	12	40	4500	2.2	0.25	280	23	1000
DPR-72-N1/N2-08	12	40	2500	1.3	0.15	185	10.2	2000

You can order DPM-20-N1-08T from us

Other products in Electromechanical devices

DPR-32-N6-02

DPR-42-N1-03

DPR-52-N1-02

DVO-1-400

ESV-2