Fuse holder for fuses with dimensions up to 4x15 mm for use in AC and DC circuits (maximum 5 A 250 V 50..2000 Hz)
Fuse holder is designed for internal manual mounting and complies with technical requirement KDPA.646116.001 TU
Contacts plating: silver. Fuse holder is corrosion resistant.
Technical parameters
| Contact resistance, not more than, Ohm | 0.01 |
| Insulation resistance between contacts, between contacts and case, not less than, MOhm | 1000 |
| Insulation strength, V | 1500 |
| Maximum current, A | 5 |
| Maximum AC and DC voltage (in normal air pressure), V | 150 |
| Minimum lifetime, H | 10000 |
| Fuse replacement cycles | 300 |
| Shelf life, years | 20 |
Operational limits
| Sinusoidal vibration frequency, Hz acceleration, m/s2 (g) displacement amplitude, mm | 5..2500 150 (15) 2 |
| Single mechanical impact acceleration, m/s2 (g) | 10000 (1000) |
| Multiple mechanical impacts acceleration, m/s2 (g) | 1500 (150) |
| Linear acceleration, m/s2 (g) | 1000 (100) |
| Ambient air temperature, oC | -85..+100 |
| Relative humidity at +35 oC | 98% |
| Diminished air pressure, Pa (mmHg) | 0.67*10-3 (5) |
