Hermetic block plug 2RM42B50SH2A1 is designed for work in electric circuits of direct, alternate (frequency up to 3 MHz) current.
Block part of connectors is produced without nipples or with straight nipples; cable part without nipples, with straight or angle nipples.
Connectors coupling - threaded, casing polarization – single splined.
Plugs are designed for interior wiring.
Contacts cover – gold or silver.
Wiring method – crimping.
Connectors are designed for wiring with shielded and unshielded cables and thus end nut of the nipple changes.
Basic technical characteristics of connectors 2RM:
General characteristics of connectors 2RM: | |
Connector type | nonhermetic |
Conventional casing size | 14, 18, 22, 24, 27, 30, 33, 36, 39, 42 |
Connector constitution | plug, socket |
Casing type | appliance, cable |
Installation element modification | Without nipple, straight nipple, angle nipple |
Coupling type | threaded |
Contacts cover | gold, silver |
Wiring method | Dimensional, soldering |
Wiring | interior |
Technical parameters of connectors 2RM: | |
Contacts total quantity | 4, 7, 8, 10, 19, 20, 22, 24, 32, 45 |
Maximum current on single contact, А: - contact diameter, 1,5 mm | |
Contacts resistance, maximum, MOhm: - contact diameter, 1 mm | |
Maximum operating voltage, V | 560; 700 |
Maximum operating frequency, MHz | 3 |
Isolation resistance in normal climatic conditions, minimum, MOhm | 5000 |
Sinusoidal vibration, frequency range, Hz | 1....5000 |
Sinusoidal vibration, acceleration, m/s2(g): | 490 (50) |
Mechanical impact, single action with acceleration, m/s2(g): | 5000 (500) |
Mechanical impact, repeated operation with acceleration, m/s2(g): | 1000 (100) |
Low atmospheric pressure, Pa | 133,32·10-12(10-12) |
High relative humidity at temperature +40°C: | 98% |
Environment high temperature, °C: | +100 or+200 |
Environment low temperature, °C: | from -60 up to +100 |
Minimum service hours, h | 1000 |
Coupling – parting maximum quantity | 500 |
Shelf life, years | 15 |