Connector 2RMD24KPN10G5V1cylindrical nonhermetic of low frequency. Connector is designed for work in electric circuits of direct and alternate current with frequency up to 3 MHz and voltage up to 700 V.
General characteristics of connectors 2РМД: | |
Connector type: | nonhermetic |
Conventional casing size | 18, 24, 27, 30, 33, 36, 39, 42, 45 |
Connector constitution: | Plug, socket |
Casing type: | Block, cable |
Shielded or unshielded: | shielded |
Coupling type: | threaded |
Contacts cover | Gold, silver |
Wiring method: | dimensional, soldering |
Wiring | Interior |
Technical parameters of connectors 2RMD: | |
Contacts total quantity | 4, 7, 8, 10, 19, 20, 22, 24, 32, 45, 50 |
Maximum current on single contact, А: | |
Contacts resistance, maximum, MOhm: | |
Maximum operating voltage, V: | 560; 700 |
Maximum operating frequency, MHz: | 3 |
Isolation resistance in normal climatic conditions, minimum, MOhm | 5000 |
Sinusoidal vibration, Frequency range, Hz | 1....5000 |
Sinusoidal vibration, acceleration, m/s2(g): | 490 (50) |
Mechanical impact, single operation with acceleration, m/s2(g): | 5000 (500) |
Mechanical impact, repeated operation with acceleration, m/s2(g): | 1000 (100) |
Minimum service hours | 1000 |
Maximum quantity of coupling-parting | 500 |
Shelf life, years | 15 |
Low atmospheric pressure, Pa | 133,32·10-12(10-12) |
High atmospheric pressure, Pa | 50,6·104(5,0) |
High relative humidity at +40°C: | 98% |
Environment operating temperature, °C: | от -60 до +100 |
Connectors 2RMD consist of two parts – plug and socket which can be either block (appliance) or cable.
Block part of the connectors is produced without nipples or with straight nipples.
Connection – threaded, body polarization – single-splined. Contacts cover – gold or silver.
Connectors are designed for wiring with shielded or unshielded cables (wires) thus nipple end nut type changes.
Connectors 2RMD are designed for internal wiring in climatic modification.