Connector 2RMT14BPE4SH1V1V is cylindrical low frequency non-hermetic tropical resistant designed for work in electric circuits of direct and alternate current with frequency up to 3 МHz with voltage up to 700 V.
Connectors 2RМТconsist of two parts: plug and socket.
Plugs and sockets can be block or cable.
Block part of connectors is produced without shell or with straight shell, cable part – without shell, with straight or angle shell.
Connectors coupling – threaded, casing polarization – single-splined.
Contacts cover- gold or silver.
Connectors are designed for wiring with shielded or unshielded cables thus changing end nut of shell.
Connectors 2RМТare designed for interior wiring in all-climatic modification .
Basic technical characteristics of connectors 2RМТ:
General characteristics of connectors 2RМТ: | |
Connector type | Non-hermetic, tropical resistant |
Climatic modification | All-climatic |
Connector constitution | Plug, socket |
Casing type | Block, cable |
Shielded or unshielded | Shielded |
Coupling type | Threaded |
Contacts cover | Gold, silver |
Wiring method | Dimensional, soldering |
Wiring | Interior |
Technical conditions of connectors 2RМТ: | |
Contacts total quantity | 4, 7, 8, 10, 19, 20, 22, 24, 32, 45, 50 |
Maximum current on single contacts, А: | |
Contacts resistance, maximum, МОm: | |
Maximum operating voltage, V: | 700 |
Isolation resistance in normal climatic conditions, minimum, МОm | 5000 |
Sinusoidal vibration, frequency range, Hz: | 1....5000 |
Sinusoidal vibration, acceleration, m/s2(g): | 490 (50) |
Mechanical impact, single action with acceleration, m/s2(g): | 5000 (500) |
Mechanical impact, repeated operation with acceleration, m/s2 (g): | 1000 (100) |
Minimum service hours, h | 1000 |
Coupling – parting quantity | 500 |
Shelflife, years | 15 |
High relative humidity at temperature+40°C: | 98% |
Environment operating temperature, °C: | from-60 up to+100 |