MRN-type connectors are of low frequency square-topped for printed and dimensional wiring.
Connectors are designed for work in circuits of direct, alternate (frequency up to 3 MHz) and pulse current with voltage up to 400 V and amperage up to 1 А.
Plugs and sockets are single-line and double-line for printed wiring designed in two variants: with mechanical mounting on board and without it.
Sockets single-line and double-line for dimension wiring are produced only with mechanical mounting on board.
Basic technical characteristics of connectors MRN:
General characteristics of connectors MRN: | |
Connector type | Right-angle, low frequency, small scale, for printed and 3-dimensional wiring |
Connector constitution | Pin contact (plug), pin hole (socket) |
Type | For 3-dimensional wiring, for direct wiring in circuit plate hole |
Wiring method | 3-dimensional, soldering |
Wiring | interior |
Technical parameters of connectors MRN: | |
Contacts total quantity | 4, 8, 14, 22, 32, 44 |
Contactresistance, maximum, Ohm | 0,01 |
Operating current on contact, maximum, А: | |
Maximum operating voltage, V: | |
Isolation electric strength, V: | 500 |
Capacitance between contacts, maximum, pF | 3 |
Sinusoidal vibration | |
Mechanical impact, single action with acceleration m/s2(g): | 10000 (1000) |
Mechanical impact, repeated operation with acceleration, m/s2(g): | 1500 (150) |
Linear acceleration, m/s2(g): | 2000 (200) |
Environment operating temperature, °C: | от -60 до +125 |
Minimum service hours, h | 5000 |
Coupling – parting quantity | 500 |