* Pictures are placed for illustration purpose only. Appearance of real component may differ.
Connectors (plugs and sockets) for standard electronic modules for DC, AC (up to 3 MHz) and impulse circuits.
Electrical parameters
Voltage minimum, mV maximum, V |
1 250 |
Current per contact minimum, µA maximum, A |
1 3 |
Contact resistance,Ohm | 0.030 |
Insulation resistance in normal conditions, MOhm at increased temperature, MOhm at increased humidity (long-term), MOhm at increased humidity (short-term), MOhm |
1000 50 5 20 |
Contact overheat, K (oC) | 293 (20) |
Operation conditions
Acceleration, m/s2 vibration 1..2000 Hz single mechanical impact multiple mechanical impact linear |
100 400 5000 250 |
Ambient air temperature, K (oC) | 213..363 (-60..+90) |
Relative humidity at +35 oC | 98% |
Air pressure minimum, Pa (mmHg) maximum, kPa (mmHg) |
670 (5) 107 (800) |
Lifetime, depending on overheat temperature (500 connection cycles)
t, K (oC) | 373 (100) | 368 (95) | 363 (90) | 358 (85) | 353 (80) | 343 (70) | 338 (65) | 328 (55) |
T·10-3, h | 5 | 7.5 | 10 | 15 | 20 | 25 | 50 | 100 |
Withdrawal force not more than 50 N, plug mass not more than 10 g, socket mass not more than 12 g.
Connectors are designed to connect 2 square-angled PCBs. Mounting method: soldering with tin solder and non-acid flux, temperature not more than 443 K (170 oC)
Termination points of a plug are soldered to a vertical PCB, socket – to a horizontal PCB. Termination points of a plug can be straight angled not closer than 2 mm to an insulator. Termination point trimming is allowed, trimmed ends should be protected with anticorrosive laquer.