Connector SHR16P2NG5 is cylindrical of low frequency and is designed for work in electric circuits of direct and alternate current with frequency up to 3 Mhz and voltage up to 850 V.
These connectors consist of two parts: a plug and a socket. Plugs and sockets can be either appliance or cable.
Block part of the connector is designed without shell, with straight or angular shell; cable part – with straight or angular shell.
Connectors coupling – threaded, body polarization is single-key.
Contact elements plating– silver, nickel.
Mounting way– soldering.
These connectors are designed for mounting with screened or non-screened cables by end nut of the shell.
Connectors are designed for indoor and outdoor (if protected from dust and water by the customer) .
Basic technical characteristics of connectors SHR:
General characteristics of connectors SHR: | |
Connector type: | Non-hermetic |
Conventional body size: | 12, 16, 20, 28, 32, 36, 40, 48, 55, 60 |
Connector constitution: | Plug, receptacle |
Body type: | Block (appliance), cable |
Modification of installation element: | Without shell, with straight shell, with angular shell |
Coupling type: | threaded |
Body polarization: | Single - key |
Contact elements cover: | Silver, nickel |
Mounting: | poin-to-point, soldering |
Technical parameters of connectors SHR: | |
Total amount of contact elements: | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 20, 23, 26, 30, 31, 35, 45, 47 |
Maximum current for single contact, А: | 20....200 |
Maximum current load on connector, А: | 20....675 |
Contact elements resistance, not more, MOhm: | |
Maximum operating voltage, V: | 850 |
Insulation resistance in normal climatic conditions, not less than, MOhm: | 5000 |
Sinusoidal vibration, frequency range, Hz: | 1....5000 |
Sinusoidal vibration, acceleration, m/s2 (g): | 300 (30) |
Single mechanicimpact with acceleration, m/s2 (g): | 5000 (500) |
Multiple mechanic impact with acceleration, m/s2 (g): | 350 (35) |
Low atmosphere pressure, Pa (mm of mercury): | 1,3·10-4(10-6) |
Operating temperature of the environment °C: | from -60 to +60 |
Temperature changes with regard to overheating temperature of contact elements, °C: | from -60 to +110 |
Minimum service hours, h: | 1000 |
Amount of couplings-unmatings: | 500 |
Shelf life, years: | 15 |