Connector SHR20P5ESH10 is cylindrical of low frequency and is designed for work in electric circuits of direct and alternate current with frequency up to 3 Mhz and voltage up to 850 V.
These connectors consist of two parts: a plug and a socket. Plugs and sockets can be either appliance or cable.
Block part of the connector is designed without nipple, with straight or angulous nipple; cable part – with straight or angulous nipple.
Connectors coupling – threaded, body polarization is single-splined.
Contact elements cover – silver, nickel.
Mounting configuration – soldering.
These connectors are designed for mounting with screened or non-screened cables by end nut of the nipple.
Connectors are designed for internal and outside (if protected from dust and water by the customer) wiring in climatic modification
Basic technical characteristics of connectors SHR:
General characteristics of connectors SHR: | |
Connector type: | Non-hermetic |
Climatic modification: | all-climatic |
Conventional casing size: | 12, 16, 20, 28, 32, 36, 40, 48, 55, 60 |
Connector constitution: | Plug, socket |
Body type: | Block (appliance), cable |
Modification of installation element: | Without nipple, with straight nipple, with angulous nipple |
Coupling type: | threaded |
Body polarization: | Single-splined |
Contact elements cover: | Silver, nickel |
Mounting configuration: | Volume, soldering |
Technical parameters of connectors SHR: | |
Total amount of contact elements: | 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 20, 23, 26, 30, 31, 35, 45, 47 |
Maximum current intensity for single contact, А: | 20....200 |
Maximum current load on connector, А: | 20....675 |
Contact elements resistance, not more, MOhm: | |
Maximum operating voltage, V: | 850 |
Insulation resistance in normal climatic conditions, not less than, MOhm: | 5000 |
Sinusoidal vibration, frequency range, Hz: | 1....5000 |
Sinusoidal vibration, acceleration, m/s2 (g): | 300 (30) |
Mechanic impulse of single action with acceleration, m/s2 (g): | 5000 (500) |
Mechanic impulse of repeated action with acceleration, m/s2 (g): | 350 (35) |
Low atmosphere pressure, Pa (mm of mercury): | 1,3·10-4(10-6) |
Operating temperature of the environment °C: | from -60 to +60 |
Temperature changes with regard to overheating temperature of contact elements, °C: | from -60 to +110 |
Minimum service hours, h: | 1000 |
Amount of couplings-unmatings: | 500 |
Shelf life, years: | 15 |