Dual control pentode for impulse generating circuits
Case type: glass envelope, microminiature.
Mass 3.5 g
Main parameters (at Uf= 6.3 V, Ua = 175 V, Ug2 = 120 V, Ug3 = 0 V, RL = 200 Ohm)
Filament current, mA | 200±20 |
Anode current, mA | 5.5±2 |
Anode current (at Ug1 = -15 V),mkA | ≤30 |
2nd grid current, mA | ≤5.5 |
1st grid reverse current, mkA | ≤0.15 |
Cathode-to-filament leakage current, mkA | ≤20 |
Mutual conductance, mA/V for 1st grid for 1st grid at Uf = 5.7 V | 3.75±0.95 ≥2.3 |
Vibronoise voltage (at Ra = 10kOhm), mV | ≤180 |
Interelectrode capacitance, pF input output input-to-output cathode-to-heater | 4.9±0.85 4.1±1 ≤0.03 ≤7 |
Durability, h | ≥2000 |
Durability criteria: 1st grid reverse current, mkA 1st grid mutual conductance, mA/V mutual conductance variation, % | ≤0.5 ≥2.3 ≤+30/-40 |
Operational limits
Filament voltage, V | 5.7..6.9 |
Anode voltage, V | 150 |
Anode voltage in off-state, V | 300 |
2nd grid current, V | 125 |
2nd grid current in off-state, V | 250 |
1st grid negative voltage, V | 50 |
Cathode-to-heater voltage, V | 150 |
Cathode current, mA | 14 |
Anode power dissipation, W | 0.9 |
2nd grid power dissipation, W | 0.5 |
1st grid circuit resistance, MOhm | 1 |
Envelope temperature, oC at normal ambient air temperature at +200 oC | +170 +250 |
Vibratory loads frequency, Hz acceleration, g frequency, Hz acceleration, g | 10.300 10 50 12 |
Multiple mechanical impacts acceleration, g | 150 |
Single mechanical impacts acceleration, g | 500 |
Linear acceleration, g | 100 |
Ambient air temperature, oC | -60..+200 |