R48P28NSH1

The R48P28NSH1 cylindrical low-frequency non-sealed socket is designed for operation in electric circuits of direct and alternating currents up to 3 MHz at a voltage of up to 2100 V. Connectors consist of two parts: plugs and sockets. Plugs and sockets can be either panel-mounted or cable-mounted. The block part of the connector is made without a back shell, with a straight or anglular shell, the cable part - with a straight or angular shell. The joint is threaded, the polarization of the shells is single-key. The contact plating - silver, nickel. Mounting method - soldering. These connectors are designed for installation with shielded or unshielded cables (wires) depending on the shell end nut type. Connectors are designed for indoor and outdoor (when protected from dust and water) installation in moderate and coldclimate (UHL) in accordance with the specifications of GE0.364.112TU, бР0.364.034TУ.

Structure of the symbol:

R48P28NSH1 socket

R - connector type;

48 - conditional body size;

P - design: for the equipment-mounted part: P - without a shell; PK - with a straight back shell; SK - with an angular back shell; for the cable part: P - with a straight shell; U - with an angular shell;

28 - number of contacts;

N – a type of end nut: E - for shielded cable; N - for unshielded cable;

SH - kind of contacts: for the instrument part: G - socket, SH - plug; for the cable part: SH - socket, G - plug;

1 – contacts layout (conditional number);

N – nickel contact coating.